Glass Beads for Polishing Blasting Material

For stripping and removing material like heavy rust and layers of paint. To do this, you want an angular media, the most common being Aluminum Oxide, or Others like Garnet, Glass Abrasive, Starblast, or Black Magic Coal Slag, etc. Abrasive Polishing Sand Blasting Glass Beads
is a surface profiling media. Shot Peening Shot Blasting Glass Beads reduces stress to the surface being blasted, and imparts a smooth bright surface that can then be painted or finished to your requirements. Many professionals use an abrasive to cut away the bad layers and then come back with a glass bead after to clean, smooth, and profile the surface to their desired specs for painting or finishing.

• Product Specification

Main products specification for Blasting Material Shot Blasting Glass Beads according to following table:

You can choose different size glass bead between 45um-850um according to different function.

• High Strength reflective Glass Beads (for Blasting)

With compressed air as implicit power, this product Sandblasting Surface Blasting Glass Beads is made by sprinkling beads under high speed and pressure on the surface of workpiece for peening and polishing.

• Other purposes of the products are as follows:

1. Clear diverse moulds of impact forging, forging, glass, rubber and plastic, metal casting and extrusion.
2. Eliminate tensile stress, increase fatigue life and enhance stress corrosion resistance. For example, aircraft engine turbo, vane, shaft, undercarriage, diversified springs and gears, etc.
3. Spherical glass beads Clean and remove slitter edge and burr on the circuit plate and plastic-sealed geminate transistors before stannum soldering
4. Remove stems in the piston and cylinder and provide bright and half-lackluster surface for medical mechanical instruments and automobile parts
5. Clear electromotor and such parts as loop, electric brush and rotor of during heavy repair
6. Polishing Blasting Grinding Glass Beads Clean up and remove burr of metal tube and precisely-melten non-ferrous metal tube. Be used for peening aggrandizement and polishing of textile machinery parts.

• High Strength Abrasive blasting glass beads

• Technical references

Appearance: Clean and transparent, no visible bubbles and impurity.
Density:2.4-2.6g/cm3
Hardness:6-7(Moh's)
Spherical beads:≥75%
SiO2 content:＞72%

• Package:

1. Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm, the outer is plastic woven bag to prevent leak or damp. The net weight of each bag is 25± 0.2kg.
2. Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm, the outer is plastic wiven bag to prevent leak or damp. The net weight of each is 1000± 8kg.

3. According to clients' requirement.

Contact us if you need more details on Reflective Glass Grit for Shot Blasting. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Grit Galss Beads for Sand Blasting、Grinding and Blasting Glass Beads Grit. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Blasting Glass Beads